Tip! To really tackle mold removal, you have to find the source of the moisture that is feeding it. Then you have to dry it out, physically scrape off the mold and then apply the right dilutions of the appropriate chemicals.

Molds are tiny fungi that reproduce by proliferation of spores ranging in size from 1 to 100 microns. Molds can grow anywhere when water is present.

Here is one of the most common problems I find in consumer air purifier reviews: someone has installed an air purifier to “get rid of mold.” Some complain that high priced HEPA purification has failed to remove the musty odor. Others gleefully report that the air smells “fresh” after using an ozone making “air purifier.”

This is the key to ozone’s success as an air purifier: active purification. It hangs about for days, oxidizing biologicals like mold. Unfortunately, ozone levels high enough to remove mold are unsafe for anyone, especially those with any illness.

In some cases, shock ozone treatments can be the best solution to a mold problem. But only where people and pets are out of the home. This is a good job for professionals. Ozone emitting air purifiers are not recommended for daily use.

The key to understanding mold is moisture. Mold will grow on a wide range of materials, when water is present. When mold grows unchecked indoors, it produces millions of airborne spores. Indoor mold spore counts can be many times higher than outdoors. These concentrations are hazardous to everyone, allergic or otherwise.

If you have a mold situation, investigate the source of moisture. Wet basements are a common source, sometimes impossible to cure. Air conditioning (HVAC) coils, collectors, and pans are often hidden sources.

Tip! If the tester observes three or more of the same mold colony type growing in one mold test kit, then the tester can reasonably conclude that there is a possible mold infestation in the area/location in which he conducted that particular mold test, regardless of the number of similar mold colonies present in the outdoor control test.

If there is leaking plumbing, roofing, or a downspout that dumps runoff near the house, there may be mold. Installing an air purifier for allergy to mold under damp conditions is bound to be a disappointment.

Water damage that has resulted in significant mold growth could require remediation by a licensed contractor. Replace rotted or damp organic building materials; wood, ceiling tile, carpeting, wallboard, and wallpaper. Particleboard kitchen and bath countertops, with pressed wood hiding under a thin facade of Formica plastic venire are often moldy on the underside.

Ionizers are not very effective at lowering mold counts. UV light can reduce mold, but the application to large areas is problematic.

UV light intensity, which decreases rapidly with distance from the bulb, must dose the mold for a time measured in minutes. Air purifiers with uv tend to use it on the filters or to activate photocatalysts. The best application of uv in a mold allergy situation is for disinfecting air conditioning coils and evaporation pans.

Tip! When tackling a large mold removal job, investing in a pair of disposable overalls will help contain the problem as you can simply throw the overalls away and not contaminate other garments in the washing machine.

Newer air purification technologies are arriving that will surpass ozone for normal household mold remediation. These are hydroxyl radical oxidizers, safer with their short lives, and photocatalytic oxidizers, which burn microorganisms with high tech semiconductors. Sharp FPN60CX would be a good alternative to ozone for a mold situation, but only for a limited room size, say under 200 square feet. The portable Sharps could easily be moved to the mold source, i.e. kitchen or bath.

Photocatalytic air purification, without paper filters, thrives in damp environments. A new and inexpensive model, the Nanobreeze, would do well in localized damp areas like baths and kitchens.

Control moisture with source removal and dehumidifiers.

When moisture is gone, properly sized HEPA air purifiers are effective at purifying airborne mold. Dedicated air sterilizers, such as Airfree and Eco-rx can help after the moisture is removed.

Click for the web’s best Air Purifier Reviews. The Author, Ed Sherbenou, is an experienced air purifier user, with 40 years of direct experience due to chemical sensitivity and severe allergies. He writes indoor air quality articles, posts blogs, and maintains a leading air purification website:

http://www.air-purifier-power.com

Bookmark to:

Warning0 if you get scared easily, you would be better off not reading any further. Not too long ago, I found something lurking in my basement0 just waiting for the opportunity to take over.

It started when I decided to renovate my basement. I was full of amazing ideas and I was feeling really creative. I gathered the aid of a some friends in cleaning out the boxes of old ornaments, books, and clothing. That0s when I came upon it.
In a dark, gloomy corner, hidden behind a pile of boxes. Nasty, disgusting, basement mold. It was black and greenish, and had already begun to cause damage the wall. I found it in a couple of other places as well.
I was mortified. My first thought was about the horror stories of how mold can cause breathing troubles and other serious complications. I have little kids and didn’t want them to get sick.
After that, I was concerned about the cost of getting rid of the basement mold. After I went through my occasional cursing therapy, I did some research on how to take care of the mold once and for all. This is what I found.
Before you do anything else, find all […]

Full Article At: KnowHow-Now.com Articles

Bookmark to: